Refine Your Search

Date

Date

Topic

Topic

Safety Chassis Materials properties Identification numbers Plastics Textile and Flexible Plastics Committee

Search Results

Viewing 41 to 60 of 106
<< First< Previous12345Next >Last >>
Sort by title
Standard

TEST METHOD FOR DETERMINING COLD CRACKING OF FLEXIBLE PLASTIC MATERIALS
1996-01-01
HISTORICAL
J323_199601
This SAE Recommended Practice is applicable for determining the cold characteristics of vinyl-coated fabrics and other automotive plastic materials, as applicable. It consists of three different methods for determining low-temperature properties of materials depending on type of material and end use.
Standard

TEST METHOD FOR DETERMINING BLOCKING RESISTANCE AND ASSOCIATED CHARACTERISTICS OF AUTOMOTIVE TRIM MATERIALS
1994-08-01
HISTORICAL
J912_199408
This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.
Standard

Standard Specification for Allowable Defects in Rolled Goods for Interior Trim
2022-01-28
CURRENT
J3064_202201
This specification is written for rolled goods used for trim sets for automotive seats. Face materials are fabric-woven or knitted textiles, and plastic goods like polyvinyl chloride (PVC), thermoplastic polyolefin (TPO), or thermoplastic polyurethane (TPU). This specification covers material rolled goods with and without foam or backing adhered to the face material.
Standard

Standard Classification System for Fiberboards
2003-12-11
HISTORICAL
J1323_200312
This SAE Standard provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947. The test methods commonly used for fiberboards are defined in SAE J315.
Standard

Standard Classification System for Fiberboards
2014-06-04
HISTORICAL
J1323_201406
This SAE Standard provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947. The test methods commonly used for fiberboards are defined in SAE J315.
Standard

Standard Classification System for Fiberboards
2009-05-22
HISTORICAL
J1323_200905
This SAE Standard provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947. The test methods commonly used for fiberboards are defined in SAE J315.
Standard

Seam Damage Test Procedure
2022-09-14
CURRENT
J1531_202209
This procedure is used to determine seam strength and seam fatigue of automotive textiles, vinyl coated fabrics and related soft trim materials.
Standard

STANDARD CLASSIFICATION SYSTEM FOR FIBERBOARDS
1983-06-01
HISTORICAL
J1323_198306
This classification system provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947, Glossary of Fiberboard Terminology. The test methods commonly used for fiberboards are defined in SAE J315, Fiberboard Test Procedure.
Standard

STANDARD CLASSIFICATION SYSTEM FOR FIBERBOARDS
1980-08-01
HISTORICAL
J1323_198008
This classification system provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947, Glossary of Fiberboard Terminology. The test methods commonly used for fiberboards are defined in SAE J315, Fiberboard Test Procedure.
Standard

STANDARD CLASSIFICATION SYSTEM FOR FIBERBOARDS
1990-09-01
HISTORICAL
J1323_199009
This SAE Standard provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947. The test methods commonly used for fiberboards are defined in SAE J315.
Standard

Procedure for Visual Evaluation of Interior and Exterior Automotive Trim
2022-10-04
CURRENT
J361_202210
This SAE Recommended Practice applies to parts and materials used in vehicle manufacture which are intended to be acceptable color matches to a specified standard. This document is intended for use with parts or materials which are opaque or nearly so. Materials covered by this document include topcoat paint finishes, interior soft trim, interior and exterior hard trim, and exterior film and flexible trim. This practice requires judgments by observers with a minimum of normal color vision and preferably superior as rated with the FM-100 hue test as specified in ASTM E1499.
Standard

Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Xenon-Arc Apparatus
2021-11-18
WIP
J2527
This SAE Standard specifies the operating procedures for a controlled irradiance, xenon-arc apparatus used for the accelerated exposure of various exterior automotive materials. The sample preparation, test durations, and performance evaluation procedures are covered in material specifications of the different automotive manufacturers. Any deviation to this test method, such as filter combinations, is to be agreed upon by contractual parties.
Standard

Outdoor Weathering of Exterior Materials
2002-03-26
HISTORICAL
J1976_200203
This test method specifies the exposure rack(s), black box(es), and instrumentation, which shall be used for the outdoor weathering of materials for automotive exterior application.
Standard

Outdoor Weathering of Exterior Materials
2012-04-16
HISTORICAL
J1976_201204
This test method specifies the exposure racks, black boxes, and instrumentation, which shall be used for the outdoor weathering of materials for automotive exterior application.
Standard

Outdoor Weathering of Exterior Materials
2022-05-18
CURRENT
J1976_202205
This test method specifies the exposure racks, black boxes, and instrumentation, which shall be used for the outdoor weathering of materials for automotive exterior application.
Standard

Optical Imaging Evaluation of Impact Damage Resistance Testing on Exterior Finishes
2011-05-26
HISTORICAL
J2661_201105
This SAE Recommended Practice covers a procedure for evaluating plastic and multiple-layer coatings exposed to gravelometer testing (as defined in SAE J400) with an optical imaging and analysis system. The intent of the procedure is to detect, count and characterize instances of damage in the coated surface that fracture the top coat layer or penetrate through multiple layers of the coating system. It may be possible to extend this methodology of coating damage evaluation to specimens that have undergone test procedures or exposures that produce similar, discrete damage sites in the coating system. If so applied, evaluation results must be interpreted with respect to the limitations and intent implied by the original evaluation procedure and its associated rating system, if applicable.
<< First< Previous12345Next >Last >>
X